Announcement

Collapse
No announcement yet.

Issues with Data File Review

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Issues with Data File Review

    Hi,
    something weird is happening with my QuikData logger. If I look at the parameters "live", everything is good and proper, but when I review a recorded file, it is all scribles. Data makes no sense. Example: engine RPM will be 50 and 0.1sec later, will be at 12,000. All the sensors show the same screwes up readings. This happens all the time regardless if the engine is running or ignition off so it is not interference. I unplugged the sensors 1 by 1 and it did nothing.
    I tried 2 different computers and 2 different sotwares and still same issue.
    Anybody have any idea to help? This makes my QuikData 100% useless at this point. I need HELP! It is hard to race without data.
    Thanks

  • #2
    I would try recording the data at a different rate.
    At 43,861 MPH Elon Musk now owns the fastest car in this Galaxy

    Comment


    • #3
      It was setup at 500 and I switched it to 100 and it worked perfectly! I put it back to 500, and now it works as well. Weird, but I will take it!!
      Thanks for the help.

      Comment


      • #4
        Happy to help.
        At 43,861 MPH Elon Musk now owns the fastest car in this Galaxy

        Comment

        Working...
        X