Announcement

Collapse
No announcement yet.

qwikdata2 digital inputs

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • qwikdata2 digital inputs

    i have a hoffer 1.75-16.0 fuel flow meter, i'm thinking i'm going to set it up on the digital input side!! has anyone tried to set this brand of flow meter up or any flow meter of any kind, on the qwikdata2. any help would be great...
    Last edited by wally526; 01-12-2018, 11:32 PM.

  • #2
    Analog inputs only do 0 to 5 volts range. The system actually converts this to a bit signal. 4096 maximum bits.

    The digital inputs ( actually a frequency signal ) counts the pulses from the hall sensor in the fuel flow sensor. You have to have the data sheet for the sensor to input this.
    Edelbrock sells a fuel flow sensor. So I believe it's settings are in the software.
    At 43,861 MPH Elon Musk now owns the fastest car in this Galaxy

    Comment


    • #3
      Page 50 of the Original Quikdata has the numbers you might be able to use. http://www.edelbrock.com/automotive/...ta_Systems.pdf
      At 43,861 MPH Elon Musk now owns the fastest car in this Galaxy

      Comment


      • #4
        Ok .thanks

        Comment

        Working...
        X