Announcement

Collapse
No announcement yet.

Edelbrock 35593

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Edelbrock 35593

    Hello everybody

    Hope you can help me.
    I bought this set 35593.

    I have a few questions .

    Why is a gasoline pump included in the set, and in the description is written that is not included.
    Is this gasoline pump strong enough? (Edelbrock VictorJr Heads with 502 BBC.)
    Why is not a Mallory distributor included?
    Does this distributor have a melonized gear for my roller cam?


    Regards
    Richard

  • #2
    Older kits came with a pump.

    mallory is no more.

    Use the gear made/recommend for the camshaft warranty.
    At 43,861 MPH Elon Musk now owns the fastest car in this Galaxy

    Comment


    • #3
      Ok thank you

      i have Edelbrock Rollin' Thunder Hydraulic Roller Camshafts 2262

      is the gear on the distributor ok for the 2262 cam?
      which gear does edelbrock prescribe?

      The set is Date. 1.28.2018

      Comment


      • #4
        I belive that the kits come with distributors that have melonized gears...good for all camshafts.

        But. The new distributors ( Max-Fire units ) have iron gears.

        So. You should call the tech line to identify the gear you have 800-416-8628.
        At 43,861 MPH Elon Musk now owns the fastest car in this Galaxy

        Comment


        • #5
          Thank you

          Can or may the throttle body be turned over?
          so that the throttle cable runs along the left side.
          and the brass screws pointing down.

          My Distributors have a iron gear !
          I exchanged it with MSD 8561

          Included in the set are MSD Blaster 2 Ignition Coils MSD-8202
          Can I take these too?
          MSD Blaster SS Coils MSD-8207

          Thank you

          Comment


          • #6
            The throttle body "directs" the air into the manifold in a "designed" way. Turning it over will change this relationship.
            You can try it. But I believe it doesn't fit.

            I'm not sure about the coil ( Edelbrock has a new coil #22742 that is in the same case shape as the MSD #8207 ). The #8202 is 7 ohms. The #8207 is .355 ohms. I don't know the ohms of the Edelbrock coil.

            You could call the tech line at 800-416-8628.
            At 43,861 MPH Elon Musk now owns the fastest car in this Galaxy

            Comment

            Working...
            X