Announcement

Collapse
No announcement yet.

Pro Flo 4 can connecter wiring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pro Flo 4 can connecter wiring

    I am installing a Pro Flo4 system along with HGM compshift Pro controller for my 4L60E transmission and I was looking at the can connector wiring diagram for the pro flo 4 it show two white wires one hi and other lo for a 9 pin connector, but my connector on my wiring harness connector is a 4 pin and one is white and the other is green which one is high and lo. I know the orange wire is power and the black is ground any advise would be appreciated.

  • #2
    Can high = pin 1
    Can low = pin 2
    Don't get too caught up in the numbers.
    Just give the Engine what it wants &
    Let the numbers be what they are.

    Jim McFarland....

    Comment

    Working...
    X