Announcement

Collapse
No announcement yet.

Use PerTronix 500 With Pro Flow 4

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Use PerTronix 500 With Pro Flow 4

    I am looking at possibly getting PerTronix 500 or PerTronix 510 - Digital HP Ignition Box
    Would like to find out if they will work with the Pro Flow 4 on my 340 Chrysler
    Thanks




  • #2
    Yes, CDI ignitions work with Pro Flo 4. There is a diagram for this in the manual. Personally, I would steer clear of Pertronix and get a FAST ignition and coil (formerly Crane cams) if the application warrants.

    Comment


    • #3
      Just to let you know.

      Fuel Air Spark Technology ( F.A.S.T. ) is a member of the Edelbrock Group : https://www.edelbrockgroup.com/
      In my neighborhood, if you open your hood to check your oil, and the vehicle still runs after you close it.......Then your labeled the Neighborhood Mechanic.
      https://forums.edelbrock.com/filedat...?photoid=42773

      Comment


      • #4
        Thank You, I will look at the FAST system

        Comment

        Working...
        X