PF4 ===Replacement parts

[Rickysnickers]

Can this info be made into a sticky, if this information on the parts is accurate, please?


Coolant temp sensor :
Edelbrock #3589
ACDELCO #213928 (OEM)

TPS :
Edelbrock
ACDELCO #19322821
Standard Products #TH42 (4150 style TB)
Standard Products #TH149T (XT 90mm TB w/internal return spring)

1-Bar Sensor
Edelbrock #36019
ACDELCO #12614970

MAT : Air Temp Sensor
Edelbrock #3578
ACDELCO # 2134663 {#88864354} Professional

O2:
Edelbrock #37-3604
Bosch #17025 0258017025

IAC;
Edelbrock

Fuel Pressure sensor:
Edelbrock #24-5022 (Sensor Only)

Distributor cap:
Edelbrock# 22731


Ignition rotor:
Edelbrock# 22733

Rotor:
Autozone F983

Adjustable phase rotor
MSD 8421 & 84211

[fleet man]

why don't you make a copie and past doc on your computer . that what i did

[CorkyE]

Did the same here, made a doc in my proflo 4 folder. That list has been updated in several posts here. You just have to search through and do your own updates.

[BITE_ME]

Edit:

For LS kits. Use the "Heat Sink" coils. Like GM D585 style. Or Edelbrock #22745.
The ECU doesn't supply enough current for "Dumb Coils".

[Rickysnickers]

why don't you make a copie and past doc on your computer . that what i did

Just to make easy for those that don't do that kind of thing. Plus, it will always be there and you'll know where to find it. Lastly, people won't have to ask the mods over and over again what the part numbers are.

[Monkeysgarage]

Thanks Peter for making this a sticky! We all appreciate it and it will assist everyone.

Might save a call here and there as well.

[Rickysnickers]

Thank you!!!!!!

[DC3]

Just to make easy for those that don't do that kind of thing. Plus, it will always be there and you'll know where to find it. Lastly, people won't have to ask the mods over and over again what the part numbers are.

Thanks for starting this thread.

I started a similar thread for XT intakes but didn't get much response. I've been editing the 1st post when I get better information. You are welcome to copy any of the info from my thread. The parts I have marked "Confirmed" were either verified by Edelbrock Techs or were consensus information I found on the forum. Here's the link to my thread: https://forums.edelbrock.com/forum/p...s-pro-flo-4-xt

DC

[2700 Cast]

Thanks for starting this thread.

I started a similar thread for XT intakes but didn't get much response. I've been editing the 1st post when I get better information. You are welcome to copy any of the info from my thread. The parts I have marked "Confirmed" were either verified by Edelbrock Techs or were consensus information I found on the forum. Here's the link to my thread: https://forums.edelbrock.com/forum/p...s-pro-flo-4-xt

DC

DC,

your link is no good.

Try to post it again.

Thanks....

[Rickysnickers]

It worked for me, but here it is... https://forums.edelbrock.com/forum/p...s-pro-flo-4-xt

[DC3]

DC,

your link is no good.

Try to post it again.

Thanks....

It works for me. If it still doesn't work for you, the thread title is "Spare / Replacement Parts - Pro-Flo 4 XT?"

DC

[DC3]

Realized that this forum really only has the capacity for 200 posts before they fall off. Decided to post the part numbers from the thread I linked above into this thread since it is now a sticky post. Will update this list as part numbers are acquired. Note that some parts may be different between XT and 4150 Intakes (TPS is one). Parts marked "Confirmed" have been verified as correct for XT intakes (at least for the XT kit listed below). Parts marked "not confirmed" have not been verified for XT.

My system is the Edelbrock Pro-Flo 4 XT (#35790) installed on a Small Block Chevrolet so those are the part numbers I'm trying to verify here:

Distributor cap:
Edelbrock# 22731 (not confirmed)

Ignition rotor:
Edelbrock # 22734 (Confirmed)
Standard Motor # FD308 (Confirmed)
Edelbrock # 22733 (not confirmed)
Autozone F983 (not confirmed)

Oxygen sensor:
Edelbrock #37-3604 (not confirmed)
Bosch #17025 0258017025 (Confirmed)

Coolant Temperature sensor:
Edelbrock #36012 (not confirmed)
Edelbrock #3589 (not confirmed)
ACDelco #213928 - OEM (not confirmed)

Fuel Pressure sensor:
Edelbrock #24-5022 - Sensor Only (not confirmed)

Intake Air Temperature sensor:
Edelbrock #3578 (not confirmed)
ACDelco #2134663 (not confirmed)
ACDelco Professional #88864354 (not confirmed)

MAP sensor:
Edelbrock #36019 ? (not confirmed)
ACDelco #12614970 (not confirmed)

Throttle Position sensor:
Standard Products #TH149T (Confirmed)
Edelbrock #?

Fuel Injectors (29 lb/hr):


Idle Air Control Valve:
Edelbrock #36015 (not confirmed)

Ignition Coil:

MSD Blaster 2 8202 (Confirmed - available at O'Reillys)
MSD High-Vibration Ignition Coil 8222 (Confirmed)
Edelbrock 22746 (Confirmed -