Announcement

Collapse
No announcement yet.

PF4 Easy to find --replacement Part Numbers

Collapse
This topic is closed.
X
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • PF4 Easy to find --replacement Part Numbers

    Can this info be made into a sticky, if this information on the parts is accurate, please?


    Coolant temp sensor :
    Edelbrock #3589
    ACDELCO #213928 (OEM)

    TPS :
    Edelbrock #36018
    ACDELCO #19322821
    Standard Products #TH42 (4150 style TB)
    Standard Products #TH149T (XT 90mm TB w/internal return spring)


    1-Bar Sensor
    Edelbrock #36019
    ACDELCO #12614970

    MAT : Air Temp Sensor
    Edelbrock #3578
    ACDELCO # 2134663 {#88864354} Professional

    O2:
    Edelbrock #37-3604
    Bosch #17025 0258017025

    IAC;
    Edelbrock #36015

    Fuel Pressure sensor:
    Edelbrock #24-5022 (Sensor Only)

    Distributor cap:
    Edelbrock# 22731


    Ignition rotor:
    Edelbrock# 22733

    Rotor:
    Autozone F983


    Hall effect Sensor not available separate
    Complete Distributor available - Contact Tech-line for RAW #
    Last edited by 2700 Cast; 02-02-2021, 11:40 AM.

  • #2
    why don't you make a copie and past doc on your computer . that what i did

    Comment


    • #3
      Did the same here, made a doc in my proflo 4 folder. That list has been updated in several posts here. You just have to search through and do your own updates.

      Comment


      • #4
        Edit:

        For LS kits. Use the "Heat Sink" coils. Like GM D585 style. Or Edelbrock #22745.
        The ECU doesn't supply enough current for "Dumb Coils".
        Last edited by BITE_ME; 10-31-2020, 11:22 PM.
        In my neighborhood, if you open your hood to check your oil, and the vehicle still runs after you close it.......Then your labeled the Neighborhood Mechanic.
        https://forums.edelbrock.com/filedat...?photoid=42773

        Comment


        • #5
          Originally posted by fleet man View Post
          why don't you make a copie and past doc on your computer . that what i did
          Just to make easy for those that don't do that kind of thing. Plus, it will always be there and you'll know where to find it. Lastly, people won't have to ask the mods over and over again what the part numbers are.

          Comment


          • #6
            Thanks Peter for making this a sticky! We all appreciate it and it will assist everyone.

            Might save a call here and there as well.

            Comment


            • #7
              Thank you!!!!!!

              Comment


              • #8
                Originally posted by Rickysnickers View Post

                Just to make easy for those that don't do that kind of thing. Plus, it will always be there and you'll know where to find it. Lastly, people won't have to ask the mods over and over again what the part numbers are.

                Thanks for starting this thread.

                I started a similar thread for XT intakes but didn't get much response. I've been editing the 1st post when I get better information. You are welcome to copy any of the info from my thread. The parts I have marked "Confirmed" were either verified by Edelbrock Techs or were consensus information I found on the forum. Here's the link to my thread: https://forums.edelbrock.com/forum/p...s-pro-flo-4-xt

                DC

                Comment


                • #9
                  Originally posted by DC3 View Post


                  Thanks for starting this thread.

                  I started a similar thread for XT intakes but didn't get much response. I've been editing the 1st post when I get better information. You are welcome to copy any of the info from my thread. The parts I have marked "Confirmed" were either verified by Edelbrock Techs or were consensus information I found on the forum. Here's the link to my thread: https://forums.edelbrock.com/forum/p...s-pro-flo-4-xt

                  DC
                  DC,

                  your link is no good.

                  Try to post it again.

                  Thanks....
                  Don't get too caught up in the numbers.
                  Just give the Engine what it wants &
                  Let the numbers be what they are.

                  Jim McFarland....

                  Comment


                  • #10
                    It worked for me, but here it is... https://forums.edelbrock.com/forum/p...s-pro-flo-4-xt

                    Comment


                    • #11
                      Originally posted by 2700 Cast View Post

                      DC,

                      your link is no good.

                      Try to post it again.

                      Thanks....


                      It works for me. If it still doesn't work for you, the thread title is "Spare / Replacement Parts - Pro-Flo 4 XT?"

                      DC

                      Comment


                      • #12
                        Realized that this forum really only has the capacity for 200 posts before they fall off. Decided to post the part numbers from the thread I linked above into this thread since it is now a sticky post. Note that some parts may be different between XT and 4150 Intakes (TPS is one).

                        My system is the Edelbrock Pro-Flo 4 XT (#35790) installed on a Small Block Chevrolet so those are the part numbers I'm trying to verify here:

                        Distributor cap:
                        Edelbrock# 22731 ()

                        Ignition rotor:
                        Edelbrock # 22734 (
                        )
                        Standard Motor # FD308 (

                        Edelbrock # 22733 (
                        Autozone F983


                        Oxygen sensor:
                        Edelbrock #37-3604
                        Bosch #17025 0258017025
                        ()

                        Coolant Temperature sensor:
                        Edelbrock #36012
                        Edelbrock #3589
                        ACDelco #213928 - OEM


                        Fuel Pressure sensor:
                        Edelbrock #24-5022 - Sensor Only (

                        Intake Air Temperature sensor:
                        Edelbrock #3578 (
                        ACDelco #2134663 (
                        ACDelco Professional #88864354 (


                        MAP sensor:
                        Edelbrock #36019 ?
                        ACDelco #12614970

                        Throttle Position sensor:
                        Standard Products #TH149T
                        Edelbrock #?

                        Fuel Injectors (29 lb/hr):


                        Idle Air Control Valve:
                        Edelbrock #36015 )

                        Ignition Coil:

                        MSD Blaster 2 8202 (- available at O'Reillys)
                        MSD High-Vibration Ignition Coil 8222 (
                        Edelbrock 22746 ( - " snarky " remark removed
                        Last edited by 2700 Cast; 11-24-2020, 08:22 AM.

                        Comment

                        Working...
                        X