Announcement
Collapse
No announcement yet.
Loosing Ground Signal To Fuel Pump Relay
Collapse
X
-
You need to check the pins in the MAIN, and Sub-harness. Sounds like they are not fully connecting.
-
Loosing Ground Signal To Fuel Pump Relay
i have been loosing ground signal from the ECU to the fuel pump relay , after i shut car off and go to restart later i get no fuel pump start , fuel pressure is 0 .
this has happened a few times and i have to jump a wire to the chassis off the relay to start the car , after that it runs fine when i unhook the ground after i start engine .
all grounds are there to battery / engine all soldered connections on harness , sbc in tank pump with regulator and return , i have tried a different relay with same results .
still not sure why the ECU will not send a ground signal sometimes ? hot wire is ok just no ground ?Tags: None
Leave a comment: