Fuel pressure sender stuck on 138 on tablet - Edelbrock Community Forum

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

X

hh454_1

New Member

Join Date: Feb 2020

Posts: 5
- Share
- Tweet
#1

Fuel pressure sender stuck on 138 on tablet

06-09-2020, 04:13 PM

Hi,
Just did my first startup with my new pro flo 4. Started right up seems to run fine and idle well. Noticed the fuel pressure before startup was 138 and it stayed at 138 while it was running (red on tablet). turned car off and reseated cables. tried again, same value. Is there an easy way to test the sensor?
Tags: None
BITE_ME

Member

Join Date: Aug 2010

Posts: 3987
- Share
- Tweet
#2

06-09-2020, 07:35 PM

You need to call tech support for a replacement 1-800-416-8628.

In my neighborhood, if you open your hood to check your oil, and the vehicle still runs after you close it.......Then your labeled the Neighborhood Mechanic.
Comment
hh454_1

New Member

Join Date: Feb 2020

Posts: 5
- Share
- Tweet
#3

06-10-2020, 11:08 AM

will do. thanks!
Comment
2700 Cast

Super Moderator

Join Date: May 2018

Posts: 723
- Share
- Tweet
#4

06-11-2020, 03:39 PM

Fuel pressure sensor ---on the way.
Comment
hh454_1

New Member

Join Date: Feb 2020

Posts: 5
- Share
- Tweet
#5

07-06-2020, 07:16 AM

That fixed it! now reads 43 psi. Thanks!!
Comment
Jackie

New Member

Join Date: Sep 2019

Posts: 2
- Share
- Tweet
#6

07-13-2020, 08:46 PM

I had the same problem, they sent me a replacement
Comment

Previous template Next

Working...

X