Announcement

Collapse
No announcement yet.

Fuel inlet

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Lyle Simons
    replied
    One point worth mentioning is that the Fuel Pressure sender is NOT required for PF4 operation (Thanks Nate for setting me straight on this). It's solely for monitoring FP via the ap. If you're running a mechanical gauge on the fuel rail, the PF4 sender is redundant.

    Leave a comment:


  • Derwud
    replied
    I had to move mine since it runs right into the Distributor.

    Leave a comment:


  • Nate S
    replied
    Yes - the sensor can go any where between the regulator and the furthest end of the fuel rail. The inlet to the fuel rail can go on either rail.

    Leave a comment:


  • 68Stang
    started a topic Fuel inlet

    Fuel inlet

    I know to fuel inlet & fuel pressure sensor, came installed on the same side of the fuel rail, my question is can i install the inlet on one side, then the FP sensor on the other side of the rail?
Working...
X