Announcement

Collapse
No announcement yet.

Instructions

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Instructions

    While reading over the instructions for the Pro-Flo 4 Plus i came across an interesting point. On page 10 of the kit #36130 instructions for LS engines there is a reference on 3.12. "The CAN Connector is provided for communication with CAN enable devices such as Edelbrock TC transmission controller or ...." Am I to understand that Edelbrock still has plans to come up with a transmission controller ???

  • #2
    They used to make manual shift controllers.......Shift knobs.
    In my neighborhood, if you open your hood to check your oil, and the vehicle still runs after you close it.......Then your labeled the Neighborhood Mechanic.
    https://forums.edelbrock.com/filedat...?photoid=42773

    Comment


    • #3
      Originally posted by customizer12 View Post
      While reading over the instructions for the Pro-Flo 4 Plus i came across an interesting point. On page 10 of the kit #36130 instructions for LS engines there is a reference on 3.12. "The CAN Connector is provided for communication with CAN enable devices such as Edelbrock TC transmission controller or ...." Am I to understand that Edelbrock still has plans to come up with a transmission controller ???
      It is currently in development--- " TC " transmission controller, via the CAN BUS.
      Don't get too caught up in the numbers.
      Just give the Engine what it wants &
      Let the numbers be what they are.

      Jim McFarland....

      Comment


      • #4
        thank you guys...i have had the TCI controller but it would be awesome to have it controlled by my pro-flow 4 LS
        system.
        .

        Comment


        • #5
          Very funny bite_me...

          Comment


          • #6
            Summit Racing had these marked down to $3.00. https://www.summitracing.com/parts/edl-4709

            I was going to pick one up ( they've been on closeout for around 10 years now ). But my 4 shifters need Nitrous buttons, and my 5 shifter is impossible to to put a knob on.
            In my neighborhood, if you open your hood to check your oil, and the vehicle still runs after you close it.......Then your labeled the Neighborhood Mechanic.
            https://forums.edelbrock.com/filedat...?photoid=42773

            Comment


            • #7
              Ha Ha Ha Ha Ha....you killing me...

              Comment

              Working...
              X