Announcement

Collapse
No announcement yet.

Few questions on the ignition side of things

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Few questions on the ignition side of things

    Need some help please guys, Fitting the pro flo 3 to a 350 sbc in a 77 c10 truck. Do i need a cdi box and a coil? Also which are the best leads to go for? I have access to MSD leads through my work.

    Thanks for the help i am new to v8s

    Miles

  • #2
    Yes, you will need some type of coil. You cannot use an HEI distributor with Pro Flo 3. A CDI box is not required. For a heavily modded engine, it is recommended. MSD makes good plug wires as well as our own.

    Comment


    • #3
      Thanks for the help Steve, Just checked and I do have a HEI distributor so will order up a coil now. Looking at the MSD blaster 2. Do I need it with the ballast resistor or not?

      Last edited by miles_c10; 08-07-2017, 02:24 PM.

      Comment


      • #4
        How does the coil wire up to the efi loom? The loom has one white wire and one orange. Does the orange go to positive and white to neg on the coil?

        Miles

        Comment


        • #5
          Yes, orange to positive and white to negative side of the coil.

          Comment


          • #6
            hi Guys, do i need a coil with the ballast resistor or not?

            Comment


            • #7
              MSD 8202 Blaster 2, no ballast resistor.

              Comment

              Working...
              X