Announcement

Collapse
No announcement yet.

Pro Flo injectors

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pro Flo injectors

    I have an pro Flo 2 system on a 400 sb motor home ebgine. When I bought it , it was set up for a bb. I bought a sb chip for it but I'm wandering if I need different injectors and witch ones. Does anyone have any information about this .

  • #2
    If it was set up for a bb then it also had a different intake ?
    but there are different sizes injectors, they are all pico syle injectors, dont know exacley wich sizes bud you can look for diferent sizes in the parts section ? Mine bbc set came with 44pph, I think you need 24 pph but am not sure dough
    496 in a 454SS truck, Pro-flo 2 and "remote 80MM turbo"

    Comment


    • #3
      when i broke one trying to remove it i found summit listed a good description to help future sourcing
      Brand:Edelbrock
      Manufacturer's Part Number:3583
      Part Type:Fuel Injectors
      Product Line:Edelbrock Fuel Injectors
      Summit Racing Part Number:EDL-3583



      UPC:085347035830
      Injector Advertised Flow Rate (lbs/hr):29 lbs./hr.
      Injector Advertised Flow Rate (cc/min):281.0cc/min
      Injector Impedance:14.9 ohms
      Driver Type:12V saturated circuit
      Overall Height (in):1.855 in.
      Seat to Seat Height (in):1.153 in.
      Manifold O-Ring Outside Diameter (in):0.574 in.
      Fuel Rail O-Ring Outside Diameter (in):0.574 in.
      Outside Diameter (in):0.599 in.
      Injector Plug Style:Jetronic/Minitimer
      Wiring Harness Included:No
      O-Rings Included:Yes
      Quantity:Sold individually.
      Notes:This is a replacement Pico fuel injector for an Edelbrock Pro-Flo EFI system.

      Comment

      Working...
      X