Announcement

Collapse
No announcement yet.

pulse frequency ?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • pulse frequency ?

    What do I set the pulse frequency on my controller for performer rpm solonoids?

  • #2
    Don't know. The Edelbrock #71900 progressive controller only needs the percentage of on time.....0 to 100%.
    Call tech support at 800-416-8628.
    Posting Green

    All my posts are made from 80% post consumer waste recycled pixels :-)

    Comment


    • #3
      Looks like 22hz https://forums.edelbrock.com/forum/n...ulse-frequency
      Posting Green

      All my posts are made from 80% post consumer waste recycled pixels :-)

      Comment


      • #4
        The default value is 22 Hz. This works fine with our solenoids and most smaller ones. If you are running the big NOS trash cans, you want to use a lower value like 18 Hz. To get to 18, you have to keep increasing until you get to 30, then it resets to 11. Then keep increasing until you get the value you want.

        Comment

        Working...
        X