Announcement

Collapse
No announcement yet.

convert pro flow 2 to pro flow 3

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • convert pro flow 2 to pro flow 3

    Can I change the pro flow 2 computer to pro flow 3

  • #2
    No. There is no direct interchange between the 2 systems. The ECU and wiring harness are different. They do share some common sensors.

    Comment


    • #3
      what if i change computer wiring harness and sensors would that help

      Comment


      • #4
        You would HAVE to change the ECU and wiring harness as they are different as I stated above. The O2 sensor is different. The TPS, MAP, air temp and water temp are the same. The manifold, rails and injectors are the same. You also need an Android tablet or phone to program it.

        Comment


        • #5
          thanks steve

          Comment


          • #6
            Originally posted by Steve M View Post
            You would HAVE to change the ECU and wiring harness as they are different as I stated above. The O2 sensor is different. The TPS, MAP, air temp and water temp are the same. The manifold, rails and injectors are the same. You also need an Android tablet or phone to program it.
            Got any part number to help

            Comment


            • #7
              The ECU part number is #22-3220
              Tablet #37-3605
              O2 #37-3604
              I don't know what the wire harness number is.
              At 43,861 MPH Elon Musk now owns the fastest car in this Galaxy

              Comment


              • #8
                Originally posted by BITE_ME View Post
                The ECU part number is #22-3220
                Tablet #37-3605
                O2 #37-3604
                I don't know what the wire harness number is.
                Good start, add to wish list

                Comment


                • #9
                  if your planing on buying this setup, talk to the tech guys because ,i was told there still working on the throttle body on proflow 2 to make this work with the proflow 3 setup...

                  Comment

                  Working...
                  X