Pro Flo XT Plus Information

[S. Armish]

Edelbrock is currently in development of an upgraded version of the new Pro Flo2 architecture. It will be called XT Plus. It is intended for competition vehicles and will include the following features:

SOFTWARE

* Live tuning
* 3D fuel and spark maps
* All maps with adjustable breakpoints
* Programmable sensor calibrations
* Closed loop lambda control
* Unique self-mapping software
* Fuel and spark trims for each cylinder
* 3D injection phase map
* Sensor correction tables
* Closed loop boost control
* ECU loadable with 2 maps
* Adjustable internal logger sample rates
* Programmable Engine Protection functions

OUTPUTS

* 8 injector drives - Saturated Drivers
* 1 coil driver
* PWM Wastegate control
* Lambda heater control
* Nitrous control (4 stages)
* Fuel pump output
* Digital tach output
* Stepper motor (IAC 4 wire)
* PWM output for IAC
* Data link to data logger

DIGITAL INPUTS

* Engine speed (hall or mag)
* Cam position (hall or mag)

SWITCH INPUTS
*Engine Kill
*Beacon (or clutch switch)
*Pit Switch (or master nitrous enable)
*Map Select (2 unique maps possible switch on the fly)
*Boost Switch (or gear position)

ANALOG INPUTS

* Throttle, Battery, Airbox, Air Temp, Water Temp, Oil Temp, Fuel Press, Oil Press, Lambda 1, Lambda 2, ECU Temp

DIAGNOSTICS

* Error codes for all sensors and pickups
* Programmable error thresholds
* Sensor Min and Max values recorded
* Non-volatile logger memory (1 meg)

[BIGBLOCKCHEV]

When is the XT Plus going to be available

[J.Wagner]

We are expecting units to be shipping mid year 2009.

[AJwolf]

Hello, will the Pro-Flo XT+ system be able to run a Pro-Flo Chevy 3500 manifold and throttle body and Mallory Hall effect distributor? Thanks.

[S. Armish]

Yes it will.

[Chook E]

I have a mild 360 in my 69 dart with edelbrock alloy heads and want to upgrade from carburetors to fuel injection. When will the XT Plus be available and what sort of performance could be expected?:

[Chook E]

If I was to purchase a smallblock Chrysler Pro Flo2 kit will edelbrock swap out the ECU for the XT Plus unit?

[S. Armish]

It wouldn't be a simple "swap out" because they don't cost the same but we might be able to work something out. The pinout from one to the other is the same. Your Pro Flo2 harness will work with the XT Plus ECU.

SA