Edelbrock Community Forum  

Go Back   Edelbrock Community Forum > Pro-Tuner EFI > Victor/Super Victor Pro Tuner EFI


Reply
 
Thread Tools Display Modes
  #1  
Old 01-23-2012, 07:19 AM
lxxtsy lxxtsy is offline
New Member
 
Join Date: Jan 2012
Posts: 2
Default Edelbrock Spyder EFI intake

I'm in the process of upgrading my GT40 upper/lower intake with the Edelbrock Junior Victor or Super Victor Spyder lower EFI intake. I have a 90mm MAF and going to add a 90mm throttle body. I'm currently running DSS 347 short block with 3cc pistons, Aluminum heads 2.055/1.66, Intake 210cc, combustion 60cc, Ford Racing X-cam, Bosch 38lb injectors, 1.7 Trick Flow rockers, 11:1 compression. I have a aftermarket hood with 4in rise.

Which intake will I benefit from the most Jr or Super Victor and which elbow can I run with the setup.

Thanks
Reply With Quote
  #2  
Old 01-23-2012, 08:58 AM
lxxtsy lxxtsy is offline
New Member
 
Join Date: Jan 2012
Posts: 2
Default intake

ok, here's what DSS racing recommends

"Edelbrock rpm 2 as an upgrade you do not have enough cam or RPM ability to take advantage of the other intakes."
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -7. The time now is 09:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.