L92 efi manifold

[aussie jake]

hi guys, im in sunny Australia, my first post

im looking at swapping the factory EFI manifold to the Edel 28455 and either 38783-39783 throttle body. The car is 100% street driven. Car is a holden Ve Ss 6lt (same engine as your G8 cadillac, currently with a 227/232 113lsa 610lift cam and 3600 circle d conv making a tad over 550hp

1. will the factory Gm injectors fit the fuel rail kit 3638?
2. what the manifold and throttle body going to cost ?
3. will the factory pcm plug and play with the throttle body?
4. anyone else done this? any tips?

or should i just wait for the fast manifold to arrive? cheers jake


aussie jake
View Public Profile
Send a private message to aussie jake
Send email to aussie jake
Find all posts by aussie jake
Add aussie jake to Your Contacts



Edit Tags Tags
None

[shaun callaway]

The IAC will work but the calibration for the TPS will probably be off. The injectors should fit into the bores without any issues.

For pricing you can get those off of the Summits website http://www.summitracing.com/

[aussie jake]

do edelbrock make a fuel rail to fit thestandard injector? i saw a picture from aguy whos running the same set up and the stock injectors are abt 30/40 too short for the fuel rail kit.????

how much Hp will the 1000 cfm throttle body handle? 500? 600?