Looking for a good ZZ502 35510 (44lb) program

[rfreyvogel]

Does anybody have a good dyno tested program for a ZZ502 crate motor or at least a good running one that they could share? I have a customer that just bought one of 35510 system the 44lbs injectors and he asked us to dyno tune it. I don't want to reinvent the wheel and charge him for reinventing the wheel.
Just thought we would ask before we got started.

Rob Freyvogel
onebadpontiac.com
ostdyno.com

[shaun callaway]

Use the calibration in the software provided, you will have to tune it a bit but it should not be that bad.

[rfreyvogel]

Use the calibration in the software provided, you will have to tune it a bit but it should not be that bad.
Which calibration number should I start with?

[shaun callaway]

The 35510 comes with 29lb/hr injectors did he upgrade the injectors?

The calibration for the bigger 44lb/hr is under part number 35500 on the cd. The calibration number is 3554. If you need help loading the program into the ECM please feel free to give me a call and I will walk you through it.