I want to buy a 71393 Pro-Flo Manifold

[STOKEDRACING]

Check down further for install pics

[CE_BRENT]

Bob at Performance Plus is a dealer.
71393 is for Factory three bolt and Edelbrock 90mm, although you could drill through and use nuts and bolts in a pinch.

71403 is for GM 90mm.

I grabbed his info from LS1tech.com



I have the black finish Pro-Flo XT in stock. $500.00 shipped. Bob
__________________
Check out our huge website! http://www.exoticperformanceplus.com
260 244-4808/260 244-4821
ATI ProCharger & Moser Engineering sales and installations

[STOKEDRACING]

Bob at Performance Plus is a dealer.
71393 is for Factory three bolt and Edelbrock 90mm, although you could drill through and use nuts and bolts in a pinch.

71403 is for GM 90mm.

I grabbed his info from LS1tech.com



I have the black finish Pro-Flo XT in stock. $500.00 shipped. Bob
__________________
Check out our huge website! http://www.exoticperformanceplus.com
260 244-4808/260 244-4821
ATI ProCharger & Moser Engineering sales and installations

Thnx mate

That was one of the places i have been talking to.it ses they are out of stock though

http://www.exoticperformanceplus.com/performance_parts/index.html?item=1913

[STOKEDRACING]

scored one through richard@proheads.com in CA

[STOKEDRACING]

Got my Intake Thursday last week ..

http://i609.photobucket.com/albums/tt171/STOKED72/IMG_0709.jpg

ARP bolts

http://i609.photobucket.com/albums/tt171/STOKED72/IMG_0711.jpg

Fuel rails

http://i609.photobucket.com/albums/tt171/STOKED72/IMG_0712.jpg

And the center piece

http://i609.photobucket.com/albums/tt171/STOKED72/IMG_0713.jpg

[STOKEDRACING]

Didn’t muck around First thing Friday morning I jumped strait in to pulling down the engine ..

http://i609.photobucket.com/albums/tt171/STOKED72/IMG_0718.jpg

Found a couple of very smalls issues with the fit
I had to dremmel out the IAC sensos as the manifold blocks it off completely.

http://i609.photobucket.com/albums/tt171/STOKED72/IMG_0723.jpg

Also had to extend my MAP sensor 4 inches to fit the new side mount ..

Had to sit it in to check clearence and take pics asap..

http://i609.photobucket.com/albums/tt171/STOKED72/IMG_0722.jpg

Fuel rails and throttle body are on

http://i609.photobucket.com/albums/tt171/STOKED72/IMG_0725.jpg

[STOKEDRACING]

LOOKS SHIT HOT!!

http://i609.photobucket.com/albums/tt171/STOKED72/IMG_0727.jpg

Tidied up the wires a little and threw my custom made tappett covers on and …Well the pictures don’t do it justice ..

http://i609.photobucket.com/albums/tt171/STOKED72/IMG_0743.jpg


http://i609.photobucket.com/albums/tt171/STOKED72/IMG_0747.jpg

[STOKEDRACING]

Here is a quick vid


http://i609.photobucket.com/albums/tt171/STOKED72/th_MVI_0751.jpg (http://s609.photobucket.com/albums/tt171/STOKED72/?action=view&current=MVI_0751.flv)

http://i609.photobucket.com/albums/tt171/STOKED72/th_MVI_0740.jpg (http://s609.photobucket.com/albums/tt171/STOKED72/?action=view&current=MVI_0740.flv)


A HUGE THNX TO RICHARD AT WEST COAST RACING HEADS.

[Spoolin]

So how does it feel? Any different? Loss of low end? Feels stronger mid range? Plans on going to the dyno?

[STOKEDRACING]

So how does it feel? Any different? Loss of low end? Feels stronger mid range? Plans on going to the dyno?

I had a dyno run and picked up 10RWhp up until 4200rpm then lost 6RWhp on the top end( a cam will fix that )
Also picked up 70Ft pounds of torque.

The motor is stock with only a bench tune so a cam valve springs and some head work will liven it right up.

The intake itself is the talk of the town(supposed to be the first in OZ installed )

Some of the guys from one of the biggest car magazines over here ( STREET COMMODORES ) have ordered 5 of these setups in silver ..

:D